Turning Numerical Value Display And/Or Character Display On And Off - YOKOGAWA TA220 User Manual

5.2 Turning Numerical Value Display and/or
Character Display ON and OFF
Procedure
KEY
LOCK SEC RANGE
IM 704610-01E
Display 2
Display 1
ns ms s
% V
%/
S
Switching the Numerical Value Display
Press MEASURE to change the numerical value displayed in Display 1. Display
2 shows the parameter whose value is displayed in Display 1.
Lv is displayed when measurement of the RF signal voltage level is turned ON (see 7.2
section).
Selecting Numerical Value Display
You can select an item to be displayed when changing the display according to the
procedure above ("Switching the Numerical Value Display").
1. Press SHIFT+ENTER (UTILITY). The Utility menu is shown on Display 2.
2. Turn the rotary knob to display Display in Display 2.
3. Press >. Disp σ/T, Disp σ, DispAVE, DispT, DispSnU, DispSnL, DispEQ, or
DispDly is displayed.
4. Turn the rotary knob to select Disp σ/T, Disp σ, DispAVE, DispT, DispSnU,
DispSnL, DispEQ, or DispDly.
5. Press > (or ENTER). Display 1 blinks.
6. Turn the rotary knob to select on or oFF.
Turning OFF Display of Numerical Values and Characters
Press SHIFT+MEASURE (DISP OFF). The DISP OFF indicator illuminates, and
numerical values and alphabetical characters are no longer displayed on
Display 1 and Display 2.
Turning ON Display of Numerical Values and Characters
The DISP OFF indicator illuminates. Numerical values and alphabetical
characters are still not displayed, but if you press SHIFT+MEASURE (DISP
OFF), the DISP OFF indicator goes out, and numerical values are displayed.
<<For a functional description, see section 2.5>>
L.MARK R.MARK
DISP OFF
MEASURE
E2T
JUDGE
PW
GO
BD x1 D to C
NO-GO GATE TIME DELAY BLOCK
FUNCTION
MEDIA ARMING INHIBIT
SHIFT SHIFT REMOTE STORE UTILITY
10%
LOCAL RECALL ENTER
20%
LEVEL
JDG LEVEL COUPLE EQ BOOST
S
POLARITY TRIG IMPEDANCE EQUALIZER
50 Ω
AUTO MAN 1M Ω CONV
SEC RANGE
SCALE
The phrase, "rotary knob & <>"
is used in the following
explanation to instruct the user
to enter numerical setting values
using the knob and arrow keys.
For details on this procedure,
see section 3.7.
5-3
5