The Remote Interface Card (Ric) - Simplex 4100ES Installation Manual

The RUI card mounts onto a 562-799 or 562-856 Motherboard.
13.2.2 Transponder Cabinets
Communication wiring from the RUI module in the host panel extends to the RIC II card in a remote transponder cabinet. The transponder
cabinet is simply a 2975-91xx Back Box with a RIC II module in it, and can have one, two, or three bays.
13.2.3

The Remote Interface Card (RIC)

Remote interface cards (RICs) in the transponder cabinets allow for data, power, and audio interconnections between the 4100 host panel
and remote locations. They support RUI connections in Class B and Class X wiring configurations.
Figure 80 illustrates the RIC circuit board.
13.3 MINIPLEX System Guidelines
The rules on this page apply exclusively to MINIPLEX systems. Review each guideline before installing a MINIPLEX 4100 system.
13.3.1 Guidelines
• The MINIPLEX master control panel must be a 4100-8210 Voice and Sound Control Panel.
• The Class B RUI card supports MINIPLEX transponders and 4602/4603 serial annunciators on the same signaling line circuit.
page 117
Figure 79: The Remote Unit Interface Card
Figure 80: The RIC II Card
4100ES Fire Alarm System Installation Guide
574-848 Rev. BQ