Simplex 4100ES Installation Manual page 97

The 4100-0623 Network Audio Riser Controller Module supports audio interconnections when connected to 4100-0621 Analog Audio
Risers or 4100-0622 Digital Audio Risers. It is a version of the Basic TIC that doesn't have an RUI input. It communicates via internal
communications and is used to control audio riser interface modules in network nodes that are stand-alone fire alarm control panels.
7.6.2 Locations on the Network Audio Riser Controller Module
Figure 60 shows the DIP switch, LED, and connector locations on the 4100-0623 Network Audio Riser Controller Module.
7.6.3 Card Specifications
Table 17 lists the specifications for the 4100-0623 Network Audio Riser Controller Module.
Electrical Specifications
Input voltage
Input Current
Environmental Specifications
Operating Temperature
Humidity
page 95
Figure 60: Network Audio Riser Controller Module
Table 17: Network Audio Riser Controller Specifications
18-33 VDC
25 mA for Network Audio Riser Controller connected to a network node
32°F to 120°F (0°C to 49°C)
10% to 93% relative humidity at 90°F (32°C)
4100ES Fire Alarm System Installation Guide
574-848 Rev. BQ