Attaching Doors - Simplex 4100ES Installation Manual

5.8.1

Attaching Doors

Read the following instructions to attach glass or solid doors to the back box. Note that the hinges and lock catch should already be
attached.
Note: A 5/16 hex nut driver is required to complete the following steps.
1. Unscrew the lock catch from the back box and retain the hardware.
2. Flip the lock catch over, and re-attach it to the back box so that the slot now protrudes to the outside of the back box. See Figure
20.
3. Remove the door from the packaging.
4. For glass doors:
- Fit the dress panel onto the back box using the grooves on the dress panel as guides.
- Secure the dress panel to the back box using the #6 torx screw provided. See Figure 21.
5. Align the door hinges with the hinge pins on the back box, and slide the door down onto the hinge pins.
page 45
Figure 20: Reversing the Lock Catch
4100ES Fire Alarm System Installation Guide
574-848 Rev. BQ