Miniplex Wiring - Simplex 4100ES Installation Manual

wiring on the left side of the bay.
a. Insert the harness connector with the blue wire into the P2 connector. Note that the P2 connector has eight pins. Insert the
harness connector on either the top four pins or the bottom four pins, not in the middle.
b. Insert the harness connector with the white wire into the P3 connector. Note that the P3 connector has eight pins. Insert the
harness connector on either the top four pins or the bottom four pins, not in the middle.
13.5

MINIPLEX Wiring

The RIC must be connected to the host panel via RUI cabling. This section explains how to wire the two together, and how to set up a
system with multiple transponders connected to the same host panel.
page 120
Figure 83: Power and Communication Wiring for the Transponder Cabinet (4100)
4100ES Fire Alarm System Installation Guide
574-848 Rev. BQ