Simplex 4100ES Installation Manual page 222

connector has eight pins. Insert the harness connector on either the top four pins or the
bottom four pins, not in the middle.
• Insert the harness connector with the white wire into the P3 connector. Note that the P3
connector has eight pins. Insert the harness connector on either the top four pins or the
bottom four pins, not in the middle.
© 2022 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject
to change without notice. Additional listings may be applicable, contact your local Simplex® product supplier for the latest status. Listings and
approvals under Simplex Time Recorder Co. Simplex, and the product names listed in this material are marks or registered marks. Unauthorized
use is strictly prohibited. NFPA 72 and National Fire Alarm Code are registered trademarks of the National Fire Protection Association (NFPA).
Microsoft and Windows are registered trademarks of
Figure 142: Power and Communication Wiring for Motherboards
Microsoft Corporation. VESDA is a trademark of Xtralis Pty Ltd.
574-848 Rev. BQ