570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Figure 5-12 : WebEASY
- Encoder Control tab (Part 2)
®
5.6.3. Program Description Control
Program Number: This control allows the user to set the program number. The default value is 1.
Transport Stream ID: This control allows the user to set the transport stream ID of the stream.
Program Name: This control allows the user to define the program name.
Provider name: This control allows the user to define the provider name.
Service Type: This drop down menu allows the user to choose the service type.
Network ID: This parameter allows the user to set the network ID of origin.
5.6.4. Compliance
Compliance Mode: This dropdown menu allows the user to select the encoder compliance mode. The
available options include Normal, TR01 and Evertz Legacy.
5.6.5. Encoder Control
Encoder Restart: This control allows the user to restart each individual encoder.
Page - 23
Revision 1.0