Table of Contents
Advertisement
o Input Stream Mode: The Input Stream Mode options available are ATSC, DVB and
MPEG. It is important to select the standard to which the stream is being coded as this
affects the context of the alarms for ETSI TR 101 290 priority 3 and the handling of AC3
Audio.
3.2.
PROGRAM TUNING
3.2.1. Program Tuning
•
Program Tuning Mode: Options are Auto, Program Select or PID Select.
o Selection of Auto will set the decoder to decode either the first program in the PAT or the
lowest program number; this can be selected using the next configuration option below.
o Program select allows the user to define the program number, PCR, video and audio
selection is automatic based upon the PMT.
o PID Select allows the user to define the PCR, Video and up to four audio by their PID
numbers. The PMT PID is ignored.
•
Auto Program Select Mode: Options are First Program in PAT or Lowest Program Number.
o First program indicates the first program defined within the PAT.
o Lowest program number will select the program with the lowest Program ID.
•
Program Number: When the Program Tuning mode is set to Program Select, enter in this field
the Program ID in decimal form.
Note: You may use the Select Program drop down menu to select the program
that you wish to tune into.
with the program numbers available in the incoming stream.
Figure 3-2 VistaLINK
®
The drop down menu will be automatically populated
Revision 1.0
7800 MultiFrame Manual
7880DEC-MP2HD-2 Dual HD MPEG-2 Decoder
PRO – Program Tuning
7880DEC-MP2HD-2 - 11
Advertisement
Table of Contents
