Table of Contents
Advertisement
7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
6.5.3. Setting the Hue
Video Proc
Hue
+/- 10
6.6.
UTILITIES
The Utilities menus are used to list the module firmware version, upgrade the firmware, and manage the
user presets. The chart below shows the items available in the Utilities menu. Sections 6.6.1 to 6.6.6 give
detailed information about each of the parameters.
Recall Preset
Store Preset
Auto Preset Recall
GPIO 1
GPIO 2
GPIO 3
GPIO 4
Upgrade
Status WIndow
About...
6.6.1. Storing and Recalling Configurations to the User Presets or the Factory Preset
The converter modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
The current state of the card will be forgotten if it has not been saved to a preset
before a recall is performed.
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.
7710UC-KF-18
With this control the user can adjust the Hue or color of components +/- 10
degrees
Used to recall the current module configuration from one of the user presets
or to reset the module to its factory preset condition.
Used to store the current module configuration to one of the user presets.
Used to enable or disable the default parameter recall
Selects the function of GPIO1 - Recall Preset 1-10/OFF
Selects the function of GPIO2 - Recall Preset 1-10/OFF
Selects the function of GPIO3 - Recall Preset 1-10/OFF
Selects the function of GPIO4 - Recall Preset 1-10/OFF
Used to upgrade the firmware in the module.
Enable or Disable display of the status screen
Shows the firmware version of the module.
Revision 0.2
Advertisement
Table of Contents
