Table of Contents
Advertisement
7700 MultiFrame Manual
7700SID(-AM) Source Identification Decoder
5.7.
OSD WINDOW CONTROLS
5.7.1. Missing/Simulated SID Message
CONTROLS
MISSING SID
MSG.
NO SID
5.7.2. Missing/Simulated SID Mode
CONTROLS
MISSING SID
MODE
ENABLE,
DISABLE
5.7.3. SID Window H Position
WINDOWS
SID WINDOW
H
0 to 39
22
7700SID(-AM)-16
Message to display when there is no SID present.
If enabled (with the following control), this message can be displayed if
there is neither VITC SID nor PESA SID present on the 7700SID's input
video on the lines set by the "PESA SID Line Number" and the "VITC SID
Line Number" controls. The text of the message can be changed. See the
section on "Changing text fields".
On/off control of missing SID mode
If enabled, the above message can be displayed if there is neither VITC
SID nor PESA SID present on the 7700SID's input video on the lines set
by the "PESA SID Line Number" and the "VITC SID Line Number"
controls. If disabled, the SID window will disappear when there is neither
SID is present.
Starting column for the SID window.
This is the character position of the first character in the SID display
window counted from the left side of the screen.
When you select this parameter, the screen text will disappear and a box
of the correct size will appear. Move it around to the desired position with
the toggle switch. Press the push button when done.
Warning, if you position the window near the audio bar graphs, you will
loose some text if you are in "TEXT" only mode (see "SDI Output" and
"Composite Output" above).
Revision 0.3
Advertisement
Table of Contents
