Dhcpv4 Server Status Detail - ZyXEL Communications XS3800-28 User Manual

IP Application > DHCP > DHCPv4
Fig ure 382
The following table describes the labels in this screen.
Table 222 IP Application > DHCP > DHCPv4
L ABEL
Server Status
Index
VID
Server Status
IP Pool Size
Relay Status
Relay Mode
VID
Current
Source
Address
54.3.1 DHC Pv4 Se rve r Sta tus De ta il
Click
IP Applic a tio n
of a DHCP server configuration to view the screen as shown. Use this screen to view details regarding
DHCP server settings configured on the Switch.
IP Application > DHCP > DHCPv4 > Server Status Detail
Fig ure 383
Chapter 54 DHCP
DESC RIPT IO N
This section displays configuration settings related to the Switch's DHCP server mode.
This is the index number. Click an index number to change the settings.
This field displays the VLAN ID for which the Switch is a DHCP server.
This field displays the starting DHCP client IP address.
This field displays the number of IP addresses that can be assigned to clients.
This section displays configuration settings related to the Switch's DHCP relay mode.
This field displays:
– if the Switch is not configured as a DHCP relay agent.
No ne
– if the Switch is configured as a DHCP relay agent only.
G lo b a l
– followed by a VLAN ID or multiple VLAN IDs if it is configured as a relay agent for specific
VL A N
VLANs.
This field displays the ID number of the VLAN for which the Switch acts as a DHCP relay agent.
This field displays the source IP address of the DHCP requests that the Switch forwards to a DHCP
server.
> > in the navigation panel and then click an existing index number
DHC P DHC Pv4
XS3800-28 User's Guide
489