Dhcp Status; Dhcp Server Status Detail; Figure 144 Ip Application > Dhcp Status; Figure 145 Ip Application > Dhcp > Dhcp Server Status Detail - ZyXEL Communications XGS-4528F User Manual

Chapter 32 DHCP

32.2 DHCP Status

Click IP Application > DHCP in the navigation panel. The DHCP Status screen displays.
Figure 144 IP Application > DHCP Status
The following table describes the labels in this screen.
Table 101 IP Application > DHCP Status
LABEL
Server Status
Index
VID
Server Status
IP Pool Size
Relay Status
Relay Mode

32.3 DHCP Server Status Detail

Click IP Application > DHCP in the navigation panel and then click an existing index
number of a DHCP server configuration to view the screen as shown. Use this screen to view
details regarding DHCP server settings configured on the Switch.
Figure 145 IP Application > DHCP > DHCP Server Status Detail
260
DESCRIPTION
This section displays configuration settings related to the Switch's DHCP server
mode.
This is the index number.
This field displays the VLAN ID for which the Switch is a DHCP server.
This field displays the starting DHCP client IP address.
This field displays the number of IP addresses that can be assigned to clients.
This section displays configuration settings related to the Switch's DHCP relay
mode.
This field displays:
• None - if the Switch is not configured as a DHCP relay agent.
• Global - if the Switch is configured as a DHCP relay agent only.
• VLAN - followed by a VLAN ID if it is configured as a relay agent for specific
VLAN(s).
XGS-4528F User's Guide