ZyXEL Communications XS3800-28 User Manual page 106

Basic Setting > Port Setup (Stacking Mode)
Fig ure 73
The following table describes the labels in this screen.
Table 24 Basic Setting > Port Setup
L ABEL DESC RIPT IO N
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This is the port index number. In stacking mode, the first number represents the slot ID and the
second one is the port number. Please note that the default stacking ports (the last four ports of
your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable a port. The factory default for all ports is enabled. A port must
be enabled for data transmission to occur.
Name Type a descriptive name that identifies this port. You can enter up to 128 alpha-numerical
characters.
Note: Due to space limitations, the port name may be truncated in some Web
Configurator screens.
Chapter 8 Basic Setting
XS3800-28 User's Guide
106