ZyXEL Communications XS3800-28 User Manual page 84

Status > Neighbor
Fig ure 58
The following table describes the fields in the above screen.
Table 12 Status > Neighbor
L ABEL DESC RIPT IO N
Port This shows the port of the Switch, on which the neighboring device is discovered.
Port Name This shows the port description of the Switch.
Link This shows the speed (either
duplex (
any device.
System Name This shows the system name of the neighbor device.
IPv4 This shows the IPv4 address of the neighbor device. The IPv4 address is a
can click to log into and manage the neighbor device through its Web Configurator.
IPv6 This shows the IPv6 address of the neighbor device. The IPv6 address is a
can click to log into and manage the neighbor device through its Web Configurator.
Select an entry's check box to select a specific port. Otherwise, select the check box in the
table heading row to select all ports.
Flush Click the
ports.
Chapter 7 Status
for 10 Mbps,
10M
for full duplex or for half). This field displays
F H
button to remove information about neighbors learned on the selected
Flush
XS3800-28 User's Guide
84
for 100 Mbps, or for 1 Gbps) and the
100M 1G
if the port is not connected to
Do wn
hype r link
hype r link
that you
that you