Ipv6 - ZyXEL Communications XS3800-28 User Manual

configure an IPv6 address to access and manage the Switch.
Click
Ba sic Se tting
Basic Setting > Interface Setup
Fig ure 74
The following table describes the labels in this screen.
Table 25 Basic Setting > Interface Setup
L ABEL
Interface Type
Interface ID
Add
Cancel
Index
Interface Type
Interface ID
Interface
Delete
Cancel

8.9 IPv6

Use this screen to view the IPv6 interface status and configure the Switch's management IPv6 addresses.
Chapter 8 Basic Setting
> in the navigation panel to display the configuration screen.
Inte rfa c e Se tup
DESC RIPT IO N
Select the type of IPv6 interface for which you want to configure. The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Specify a unique identification number (from 1 to 4094) for the VLAN interface or a unique
identification number (from 0 to 2) for the loopback interface.
To have IPv6 function properly, you should configure a static VLAN with the same ID number in the
>
Adva nc e d Applic a tio n VL AN
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
to the non-volatile memory when you are done configuring.
Click to reset the fields to your previous configuration.
C a nc e l
This field displays the index number of an entry.
This field displays the type of interface.
This field displays the identification number of the interface.
This field displays the interface's descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click to remove the selected entry from the summary table.
De le te
Click to clear the check boxes.
C a nc e l
XS3800-28 User's Guide
screens.
link on the top navigation panel to save your changes
Sa ve
108