Configure Vlan Port Settings - ZyXEL Communications XS3800-28 User Manual

Table 48 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
L ABEL
Port
*
Control
Tagging
Add
Cancel
Clear
VID
Active
Name
VLAN Type
Association
VLAN List
Delete
Cancel
9.7 C o nfig ure VL AN Po rt Se tting s
Use this screen to configure the static VLAN (IEEE 802.1Q) settings on a port. Click the
in the
VL AN C o nfig ura tio n
Chapter 9 VLAN
DESC RIPT IO N
The port number identifies the port you are configuring. In stacking mode, the first number
represents the slot ID and the second one is the port number. Please note that the default
stacking ports (the last four ports of your Switch) cannot be configured. They are reserved for
stacking only.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select for the port to dynamically join this VLAN group using GVRP. This is the default
No rm a l
selection.
Select for the port to be a permanent member of this VLAN group.
Fixe d
Select if you want to prohibit the port from joining this VLAN group.
Fo rb idde n
Select if you want the port to tag all outgoing frames transmitted with this VLAN
T X T a g g ing
Group ID.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
Click to start configuring the screen again.
C le a r
This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings.
This field indicates whether the VLAN settings are enabled (
This field displays the descriptive name for this VLAN group.
This field displays the
No rm a l
in the top part of this screen.
This field displays which secondary private VLANs are associated with a primary private VLAN
configured in the top part of this screen.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click to remove the selected entry from the summary table.
De le te
Click to clear the check boxes.
C a nc e l
screen.
XS3800-28 User's Guide
link on the top navigation panel to save your changes
Sa ve
or ( ,
Priva te Prim a ry Iso la te d
141
) or disabled ( ).
Ye s No
or ) type VLAN configured
C o m m unity
VL AN Po rt Se tup
link