ZyXEL Communications XS3800-28 User Manual page 429

Advanced Application > OAM Status > OAM Details
Fig ure 334
The following table describes the fields in the above screen.
Table 191 Advanced Application > OAM Status > OAM Details
L ABEL DESC RIPT IO N
Discovery This section displays OAM configuration details and operational status of the port on the
Switch and/or the remote device.
Local Client/Remote Client
OAM configurations
Mode This field displays the OAM mode. The device in active mode (typically the service
provider's device) controls the device in passive mode (typically the subscriber's device).
Ac tive
notification PDUs, variable request/response PDUs, or loopback control PDUs.
Pa ssive
PDUs; may send event notification PDUs; and may respond to variable request PDUs or
loopback control PDUs.
The Switch might not support some types of PDUs, as indicated in the fields below.
Chapter 43 OAM
: The port initiates OAM discovery; sends information PDUs; and may send event
: The port waits for the remote device to initiate OAM discovery; sends information
XS3800-28 User's Guide
429