Ipv6 Dhcp Trust Setup - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

The following table describes the labels in this screen.

Table 143 Advanced Application > IP Source Guard > IPv6 Snooping VLAN Setup

29.10 IPv6 DHC P T rust Se tup

Use this screen to specify which ports are trusted for DHCPv6 snooping. To open this screen, click

Adva nc e d Applic a tio n

Note: DHCPv6 solicit packets are sent from a DHCPv6 client to a DHCPv6 server. Reply

packets from a DHCPv6 server connected to an untrusted port are discarded.

Use port * to have all ports be

Chapter 29 ARP Inspection

Advanced Application > IP Source Guard > IPv6 Snooping VLAN Setup

DESC RIPT IO N

Select the VLAN interface to apply the selected DHCPv6 snooping policy.

Select the IPv6 snooping policy to apply to this VLAN interface.

Click this to create the IPv6 source guard policy or to update an existing one.

Click this to reset the values above or if not applicable, to clear the fields above.

Click this to clear the fields above.

This field displays a sequential number for each binding.

This field displays the VLAN interface.

This field displays the DHCPv6 snooping policy.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Select an entry check box and click

Click this to clear the

IP So urc e G ua rd

XS3800-28 User's Guide

to remove the specified entry.

check boxes above.

IPv6 DHC P T rust Se tup

Troubleshooting