ZyXEL Communications XS3800-28 User Manual page 140

Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (Stacking Mode)
Fig ure 105
The following table describes the related labels in this screen.
Table 48 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup
L ABEL DESC RIPT IO N
ACTIVE Select this check box to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable characters. Spaces are allowed.
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Note: Do NOT add a VLAN ID that has been used in the
VLAN Type Select
No rm a l
Association
Prim a ry
VLAN List to one (secondary)
You only configure
consecutive VLANs and a comma (no spaces) to associate non-consecutive VLANs. For
example, 51–53 includes 51, 52 and 53, but 51,53 does not include 52.
Secondary private VLANs can only be associated with one primary private VLAN.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Chapter 9 VLAN
(static) or . For
Priva te
private VLANs can associate with several (secondary)
private VLAN.
Iso la te d
VL AN Asso c ia tio n L ist
XS3800-28 User's Guide
140
Vo ic e VL AN Se tup
VLANs, select
Priva te Prim a ry
C o m m unity
for private VLANs. Use a dash to associate
Prim a ry
.
, or .
Iso la te d C o m m unity
private VLANs and up