ZyXEL Communications XS3800-28 User Manual page 463

The following table describes some common output fields.
Table 208 IP Application > IPv4 OSPF > OSPF Status: Common Output Fields
FIEL D DESC RIPT IO N
Interface
Internet Address This field displays the IP address and subnet bits of an IP routing domain.
Area This field displays the area ID.
Router ID This field displays the unique ID of the Switch.
Transmit Delay This field displays the transmission delay in seconds.
State This field displays the state of the Switch (
Priority This field displays the priority of the Switch. This number is used in the designated router
election.
Designated Router This field displays the router ID of the designated router.
Backup Designated This field displays the router ID of a backup designated router.
Router
Time Intervals This field displays the time intervals (in seconds) configured.
Configured
Neighbor Count This field displays the number of neighbor routers.
Adjacent Neighbor This field displays the number of neighbor routers that is adjacent to the Switch.
Count
Neighbor
Neighbor ID This field displays the router ID of the neighbor.
Pri This field displays the priority of the neighbor. This number is used in the designated router
election.
State This field displays the state of the neighbor (
Dead Time This field displays the dead time in seconds.
Address This field displays the IP address of a neighbor.
Interface This field displays the MAC address of a device.
Link State Database
Link ID This field displays the ID of a router or subnet.
ADV Router This field displays the IP address of the layer-3 device that sends the LSAs.
Age This field displays the time (in seconds) since the last LSA was sent.
Seq # This field displays the link sequence number of the LSA.
Checksum This field displays the checksum value of the LSA.
Link Count This field displays the number of links in the LSA.
Chapter 50 OSPF
b a c kup
XS3800-28 User's Guide
463
or (designated router)).
DR
or (designated router)).
b a c kup DR