ZyXEL Communications XS3800-28 User Manual page 536

Management > Maintenance > Certificates
Fig ure 432
The following table describes the labels in this screen.
Table 249 Management > Maintenance > Certificates
L ABEL DESC RIPT IO N
File Path Click
Password Enter the certificate file's password that was created when the PKCS #12 file was exported.
The password consists of up to 32 ASCII characters.
Import Click this button to save the certificate that you have enrolled from a certification authority
from your computer to the Switch.
Synchronize
Note: This part only appears in stacking mode.
Certificate
Active Enable this option to allow the master Switch in stacking mode to synchronize CA-signed
certificates to all stacking members and save it to their non-volatile memory.
Or, delete the stacking members' CA-signed certificate if a CA-signed certificate does not
exist in the master Switch.
Otherwise, disable this option.
Apply Click
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
Service This field displays the service type that this certificate is for.
Subject This field displays identifying information about the certificate's owner, such as CN
(Common Name), OU (Organizational Unit or department), O (Organization or company)
and C (Country). It is recommended that each certificate have unique subject
information.
Issuer This field displays identifying information about the certificate's issuing certification
authority, such as a common name, organizational unit or department, organization or
company and country.
Valid From This field displays the date that the certificate becomes applicable.
Valid To This field displays the date that the certificate expires.
Chapter 58 Maintenance
or to find the certificate file you want to upload.
C ho o se File Bro wse
to save your changes to the Switch's run-time memory. The Switch loses these
Apply
to begin configuring this screen afresh.
C a nc e l
XS3800-28 User's Guide
536
link on the top navigation panel to
Sa ve