ZyXEL Communications XS3800-28 User Manual page 100

Basic Setting > IP Setup > IP Configuration
Fig ure 69
The following table describes the labels in this screen.
Table 21 Basic Setting > IP Setup > IP Configuration
L ABEL DESC RIPT IO N
Domain Name Enter a domain name server IPv4 address in order to be able to use a domain name instead of
Server 1/2 an IP address.
Default Management IP Address
Use these fields to create or edit IP routing domains on the Switch.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address, subnet
mask, a default gateway IP address and a domain name server IP address automatically.
Option-60 DHCP Option 60 is used by the Switch for identification to the DHCP server using the VCI
(Vendor Class Identifier) on the DHCP server. The Switch adds it in the initial DHCP discovery
message that a DHCP client broadcasts in search of an IP address. The DHCP server can assign
different IP addresses or options to clients with the specific VCI or reject the request from clients
without the specific VCI.
Select this and enter the device identity you want the Switch to add in the DHCP discovery
frames that go to the DHCP server. This allows the Switch to identify itself to the DHCP server.
Class-ID Type a string of up to 32 characters to identify this Switch to the DHCP server. For example, Zyxel-
TW.
Chapter 8 Basic Setting
XS3800-28 User's Guide
100