ZyXEL Communications XS3800-28 User Manual page 264

28-port 10gbe l3 managed switch

Hide thumbs Also See for XS3800-28:

Table of Contents

Advanced Application > VLAN Stacking (Standalone Mode)

Advanced Application > VLAN Stacking (Stacking Mode)

The following table describes the labels in this screen.

Table 99 Advanced Application > VLAN Stacking

DESC RIPT IO N

Select this check box to enable VLAN stacking on the Switch.

This field appears only in stacking mode. Click the drop-down list to choose the slot number of the

Switch in a stack.

This field displays the port number. In stacking mode, the first number represents the slot ID and the

second is the port number. Please note that the default stacking ports (the last four ports of your

Switch) cannot be configured. They are reserved for stacking only.

Chapter 24 VLAN Stacking

XS3800-28 User's Guide

Troubleshooting