ZyXEL Communications XS3800-28 User Manual page 545

Management > Access Control > SNMP > Trap Group > Port (Standalone Mode)
Fig ure 437
Management > Access Control > SNMP > Trap Group > Port (Stacking Mode)
Fig ure 438
The following table describes the labels in this screen.
Table 256 Management > Access Control > SNMP > Trap Group > Port
L ABEL DESC RIPT IO N
Option Select the trap type you want to configure here.
SLOT This field appears only in stacking mode. Click the drop-down list to choose the slot number of
the Switch in a stack.
Port This field displays the port number. In stacking mode, the first number represents the slot ID
and the second is the port number. Please note that the default stacking ports (the last four
ports of your Switch) cannot be configured. They are reserved for stacking only.
* Settings in this row apply to all ports.
Use this row only if you want to make some of the settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Chapter 59 Access Control
XS3800-28 User's Guide
545