ZyXEL Communications XS3800-28 User Manual page 89

Basic Setting > System Info (Stacking Mode)
Fig ure 61
The following table describes the labels in this screen.
Table 14 Basic Setting > System Info
L ABEL DESC RIPT IO N
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W This field displays the version number of the Switch 's current firmware including the date created.
Version
Ethernet This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
CPU Utilization CPU utilization quantifies how busy the system is.
CPU utilization.
Memory Memory utilization shows how much DRAM memory is available and in use. It also displays the
Utilization current percentage of memory utilization.
Name This field displays the name of the memory pool.
Total (byte) This field displays the total number of bytes in this memory pool.
Used (byte) This field displays the number of bytes being used in this memory pool.
Utilization This field displays the percentage (%) of memory being used in this memory pool.
(%)
Hardware Monitor
Temperature The Switch has temperature sensors that are capable of detecting and reporting if the
Unit temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature /
BO ARD
(C/F) printed circuit board.
Current This shows the current temperature at this sensor.
MAX This field displays the maximum temperature measured at this sensor.
MIN This field displays the minimum temperature measured at this sensor.
Threshold This field displays the upper temperature limit at this sensor.
Status This field displays
and / refers to the location of the temperature sensor on the Switch
MAC PHY PO WER
for temperatures below the threshold and
No rm a l
XS3800-28 User's Guide
89
displays the current percentage of
C urre nt (% )
for those above.
Erro r