ZyXEL Communications XS3800-28 User Manual page 115

Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
Fig ure 81
The following table describes the labels in this screen.
Table 32 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup
L ABEL DESC RIPT IO N
Domain Name Enter a domain name server IPv6 address in order to be able to use a domain name instead of an
Server 1/2 IP address.
Apply Click
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Cancel Click this to reset the
Interface Select the IPv6 interface you want to configure.
IPv6 Global Manually configure a static IPv6 global address for the interface.
Address
Prefix Length Specify an IPv6 prefix length that specifies how many most significant bits (start from the left) in
the address compose the network address.
EUI-64 Select this option to have the interface ID be generated automatically using the EUI-64 format.
Add Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
Clear Click
C le a r
Index This is the interface index number. Click an index number to change the settings.
Interface This is the name of the IPv6 interface you created.
IPv6 Global This field displays the IPv6 global address and prefix length for the interface.
Address/Prefix
Length
EUI-64 This shows whether the interface ID of the global address is generated using the EUI-64 format.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Chapter 8 Basic Setting
to save your changes to the Switch's run-time memory. The Switch loses these
Do m a in Na m e Se rve r
Sa ve
to begin configuring this screen afresh.
to reset the fields to the factory defaults.
XS3800-28 User's Guide
115
link on the top navigation panel to save
Sa ve
values in this screen to their last-saved values.
link on the top navigation panel to save your changes