ZyXEL Communications XS3800-28 User Manual page 206

Advanced Application > Mirroring > RMirror > Destination (Standalone Mode)
Fig ure 156
Advanced Application > Mirroring > RMirror > Destination (Stacking Mode)
Fig ure 157
The following table describes the labels in this screen.
Table 74 Advanced Application > Mirroring > RMirror > Destination
L ABEL DESC RIPT IO N
RMirror VLAN ID Select the RMirror VLAN over which the mirrored traffic is forwarded.
Monitor Port Specify the port to which you copy the traffic in order to examine it in more detail without
interfering with the traffic flow on the original ports.
In stacking mode, the first box field is the slot ID and the second field is the port number.
Tagging Select whether to add the RMirror VLAN tag to mirrored traffic on the monitor port.
Apply Click
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
VLAN This field displays the ID number of RMirror VLAN over which the mirrored traffic is
forwarded.
Monitor Port This field displays the number of port that receives the mirrored traffic from the source
device for analysis.
Tagging This field displays whether the mirrored traffic is tagged with the RMirror VLAN ID.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Delete Check the rules that you want to remove in the
button.
Cancel Click
Chapter 16 Mirroring
to save your changes to the Switch's run-time memory. The Switch loses these
Apply
to begin configuring this screen afresh.
C a nc e l
to begin configuring this screen afresh.
C a nc e l
XS3800-28 User's Guide
206
link on the top navigation panel to
Sa ve
column and then click the
De le te De le te