ZyXEL Communications XS3800-28 User Manual page 169

blocking state to forwarding state so as to eliminate transient loops.
Table 60 STP Port States
PO RT ST AT E DESC RIPT IO N
Disabled STP is disabled (default).
Blocking Only configuration and management BPDUs are received and processed.
Listening All BPDUs are received and processed.
Note: The listening state does NOT exist in RSTP.
Learning All BPDUs are received and processed. Information frames are submitted to the learning process
but not forwarded.
Forwarding All BPDUs are received and processed. All information frames are received and forwarded.
Multiple RST P
MRSTP (Multiple RSTP) is Zyxel's proprietary feature that is compatible with RSTP and STP. With MRSTP, you
can have more than one spanning tree on your Switch and assign ports to each tree. Each spanning
tree operates independently with its own bridge information.
In the following example, there are two RSTP instances (
To set up MRSTP, activate MRSTP on the Switch and specify which ports belong to which spanning tree.
Note: Each port can belong to one STP tree only.
MRSTP Network Example
Fig ure 126
Multiple ST P
Multiple Spanning Tree Protocol (IEEE 802.1s) is backward compatible with STP/RSTP and addresses the
limitations of existing spanning tree protocols (STP and RSTP) in networks to include the following
features:
• One Common and Internal Spanning Tree (CIST) that represents the entire network's connectivity.
• Grouping of multiple bridges (or switching devices) into regions that appear as one single bridge on
the network.
• A VLAN can be mapped to a specific Multiple Spanning Tree Instance (MSTI). MSTI allows multiple
VLANs to use the same spanning tree.
• Load-balancing is possible as traffic from different VLANs can use distinct paths in a region.
Chapter 13 Spanning Tree Protocol
XS3800-28 User's Guide
169
and ) on switch
MRST P 1 MRST P2
.
A