ZyXEL Communications XS3800-28 User Manual page 530

Management > Maintenance > Firmware Upgrade (Stacking Mode)
Fig ure 426
The top of firmware upgrade screen shows which firmware version is currently running on the Switch.
Type the path and file name of the firmware file you wish to upload to the Switch in the
or click or
C ho o se File Bro wse
to load the new firmware. Select the
Upg ra de
reboot the Switch and click
new firmware.
After the process is complete, see the
Table 246 Management > Maintenance > Firmware Upgrade
L ABEL DESC RIPT IO N
Slot This field appears only in stacking mode.
This is the slot index number.
Name This is the name of the Switch that you are configuring.
Status This field appears only in stacking mode.
This field displays the current stacking status on the Switch.
Version The Switch has 2 firmware sets,
•
•
•
Current Boot Image This displays which firmware is currently in use on the Switch (
Chapter 58 Maintenance
to locate it. Firmware upgrades are only applied after a reboot. Click
C o nfig Bo o t Im a g e
to apply the new firmware immediately. Click
Apply
Syste m Info
shows the version number (and model code) and MM/DD/YYYY creation date
Running
of the firmware currently in use on the Switch (
information is also displayed at System Information in Basic Setting.
shows its version number (and model code) and MM/DD/YYYY creation
Firm wa re 1
date.
shows its version number (and model code) and MM/DD/YYYY creation
Firm wa re 2
date.
XS3800-28 User's Guide
530
drop-down list box if you want to
screen to verify your current firmware version number.
and
Firm wa re 1 Firm wa re 2
Firm wa re 1
text box
File Pa th
to load the
Upg ra de
, residing in flash.
or . The firmware
Firm wa re 2)
or
Firm wa re 1 Firm wa re 2)
.