Pppoe Ia Per-Port - ZyXEL Communications XS3800-28 User Manual

Table 156 Advanced Application > PPPoE > Intermediate Agent (continued)
L ABEL
Apply
Cancel
34.3.1 PPPo E IA Pe r- Po rt
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the
Po rt
Advanced Application > PPPoE > Intermediate Agent > Port (Standalone Mode)
Fig ure 278
Chapter 34 PPPoE
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
link in the
Inte rm e dia te Ag e nt
XS3800-28 User's Guide
link on the top navigation panel to save
Sa ve
screen to display the screen as shown.
363