Removing An Expansion Card From A Riser Module; Preliminary Steps; Removing The Middle Riser Module - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

9.2.2

Removing an expansion card from a riser module

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.2.2.1

Preliminary steps

"Shutting down the server" on page 40
Ê
"Disconnecting the power cord" on page 41
Ê
"Getting access to the component" on page 42
Ê
Ê If applicable, remove all external cables from the expansion card.
"Removing the rear top cover" on page 47
Ê
9.2.2.2

Removing the middle riser module

Figure 68: Removing the middle riser module
Ê Remove the three screws (see circles).
Ê Remove the middle riser module (see arrow).
GX2460 M1
Upgrade and Maintenance Manual
Expansion cards and riser modules
Hardware: 10 minutes
115