Expansion cards and backup units
▶
"Switching on the server" on page
▶ If
applicable,"Removing the front cover with lock" on page
▶ If applicable,
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.7.2
Removing an expansion card from a riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If
applicable,"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the corresponding riser module, see
page
63.
Removing an expansion card from a riser module
▶ If necessary, disconnect the cables from the expansion card.
210
60.
46.
Upgrade and Maintenance Manual
104.
Hardware: 5 minutes
Software: 5 minutes
81.
47.
48.
"Removing a riser module" on
45.
89.
45.
RX4770 M6