Set Tmoperator_Tmrobot_Tmpltzop_V002_Pillar - Techman Robot TM Palletizing Operator User Manual

In the project function ment at right, click Set I/O While Project Stop > Customized。
4.
In circles below Control Box, set DO0 and DO1 to L。
5.

Set TMOperator_TMROBOT_TMPLTZOP_V002_Pillar

Before starting the palletizing project, please calibrate pillar first and connect the USB dongle to
the control box.
Note:
The component will be unavailable if the USB dongle is not connected.
TM Palletizing Operator User's Manual
Figure 105: Set I/O While Project Error
Figure 106: Set I/O While Project Stop
Product Version: 1.1 Document Version: 1.2 143