Technician's Handbook
Upgrading an SX-200 IP Node
Upgrading from CD-ROM
.
The upgrade procedure will install new software in the
IP Node.
Installer's PC requirements
Windows NT 4.0 or Windows 2000 operating system
n
FTP server running (with IIS installed)
n
A communications program such as VT100 or HyperTerm
n
A serial connection to the SX-200 Maintenance port
n
Windows 2000 users must clear the browser cache.
n
You also need
The IP address of the SX-200 IP Node
n
SX-200 IP Node software CD-ROM
n
Time: The entire upgrade procedure takes approximately 20
n
minutes.
To upgrade the Sx-200 IP Node software
1. Connect both the PC and the SX-200 IP Node to the LAN.
2. Connect the serial cable from the PC to the Maintenance Port on the
SX-200 IP Node.
3. From your PC, ping the SX-200 IP Node to verify that you have a
TCP/IP connection.
4. Insert the Mitel Networks SX-200 IP Node software CD-ROM into
the CD drive of the installer's PC.
5. Run the "Setup.exe" program from the CD.
6. Select New Installation.
36