Mitel SX-200 EL Technician's Handbook page 105

Table 15: SX-200 IP Node Troubleshooting Table (Continued)
Indication
WARNING: Startup
incomplete after 1800
Troubleshooting and Repair
Possible Causes
The DHCP server is
not functioning
properly.
Action
1. If you're not using a
Mitel DHCP server,
disconnect all DHCP
servers
OR
Disconnect the IP
Node from the subnet.
2. In the serial port
window on the PC,
type
RetrieveDhcpDefaults.
3. Type Reboot.
4. Connect the BCC III
Card to the Ethernet
Switch with an
Ethernet crossover
cable.
5. Connect the IP
Node to the Ethernet
Switch.
6. Allow the IP Node to
reboot.
If the IP Node is still
not working:
1. Reboot the IP Node.
2. Stop at Autoboot.
3. At the [VxWorks
Boot] prompt, type c.
4. Check all settings.
(Sheet 2 of 2)
95