Programming A Printer Port; System Printer Port; Dataset Printer Port - Mitel SX-200 EL Technician's Handbook

Technician's Handbook

Programming a Printer Port

System Printer Port

1. Form 34, Directed I/O
Program the printer port in Form 34.
n
Define Printout Types that are to be delivered to the system
n
printer port.
Remove printer port for print types not used.
n
Speed of printer port is programmed in Maintenance.
n
Printer ports only work on main control cabinets, not on periph-
eral cabinets.

Dataset Printer Port

1. Form 11, Data Circuit Descriptor
Define a circuit descriptor to match characteristics of device
n
type. Refer to Form 04, System Options and Timers on page
127 for typical circuit descriptor.
2. Form 12, Dataset Assignment
Assign type of data device for the dataset PLID.
n
DSCONS
1101M
1103/2103
Assign a Tenant, Extension number, COS, COR, and circuit
n
descriptor number.
3. Form 34, Directed IO
Define printout type to be delivered to defined dataset.
n
104
Console (output only, maximum 2400 baud)
®
MiLINK Dataset
Standalone dataset