Checking A System For Alarms; Checking A System For Database Errors - Mitel SX-200 EL Technician's Handbook

Technician's Handbook

Checking a System for Alarms

1. Log onto the maintenance terminal and select Maintenance mode.
Refer to Logging In (page 231) for instructions on how to log into
a maintenance terminal.
The Maintenance screen displays the version of system software
and the system alarm status.
2. Select the following commands:
REPORTS
SHOW ALARMS (DEVICE_TYPE or ALL)
or
REPORTS
SHOW STATUS (Bay/Slot/Circuit or SWID or Ext_Num or ALL)
SHOW ALARMS displays alarms by device type (or all)
SHOW STATUS displays status by Bay/Slot/Circuit (PLID) or SWID
or Ext_Num or ALL or Logs Read All
Checking a System for Database
Errors
1. Access CDE.
2. Select Form 01.
3. Select VERIFY DATA.
26