Ip Device Resource Manager; Node Ip Connection Group - Mitel MiVoice Office 250 Installation And Administration Manual

MiVoice Office 250 Installation and Administration Guide
as IP networking or UVM. In the more effective scenarios, however, the majority of IP resources
would be kept available to be shared as needed. For programming details, refer to the MiVoice
Office 250 Features and Programming Guide.
Together, the preceding factors allow you to configure more IP phones than the number of IP
resources available in a system. If all IP resources are in use, subsequent demands for IP resources
are placed in a Camp On state until IP resources become available.
Depending on the configuration of reserved IP resources, a few scenarios may produce an
unavailable IP resource condition. When system configuration results in an unavailable resource,
a warning appears on display phones, and the user hears a beep every 5 seconds. To review the
scenarios that may generate an unavailable IP resource error, refer to the MiVoice Office 250
Features and Programming Guide.
To effectively oversubscribe an IP-dominant system, the Resource Reservation feature must
NOTE be used sparingly to avoid depleting the system pool of available IP resources. For
programming details, refer to the MiVoice Office 250 Features and Programming Guide.

IP Device Resource Manager

The IP Device Resource Manager maintains all IP resource requests in the system along with all
allocated IP resources in the system. It provides useful diagnostic data to determine what types of
calls are going on in the system and how long calls have been both camped-on or on an active call.
For details, refer to the MiVoice Office 250 Features and Programming Guide.

Node IP Connection Group

The Node IP Connection Group corresponds to an IP network connection between a remote node
and the local node.
52