Restoring the Database
Restoring the SX-200 EL/ML Database
To restore a customer database, your communication package
must support the Kermit protocol. We recommend Terminal or
Hyper Terminal.
1. Select the following maintenance commands:
SYSTEM
DATABASE
RESTORE
ENTER
2. Exit to a local Kermit session.
3. Specify the name and location of the software file that you want to
transfer to the system and send it to the system.
4. After the file transfer has completed, the message
"Download/Upload Successful " appears on the screen.
After the database file is restored, the system automatically resets
the system and the following entry is added to the log file : Main
Control was reset due to Database Restore.
The system will reboot automatically when it detects the presence
of a new database.
Restoring the SX-200 LIGHT/DIGITAL Database
1. Reset the system.
2. Remove the disks.
3. Insert the disks with the backed-up database.
4. Reset the system.
5. After the system restabilizes, copy the database to the previous
disks.
Troubleshooting and Repair
55