Deleting A Device And All Dependent Resources - Mitel SX-200 EL Technician's Handbook

Technician's Handbook
1. To automatically program all connected stations, DNIC sets and
DMPs
2. Install all ONS cards, OPS cards, and DNIC cards. Do not program
stations, DNIC, sets or DMPs.
3. Connect the DNIC sets or DMPs to the circuits.
4. Access Form 09, Desktop Device Assignments.
5. Press Auto Program.
After verifying that the unprogrammed sets are physically connected,
the system automatically programs all unprogrammed circuits. The
system displays all of the devices that have been programmed.
If a circuit cannot be programmed because an extension number has
already been assigned to that circuit, a warning is displayed. Press
ABORT to cancel the procedure or press CONTINUE to skip the device
and resume programming the other devices in the range.

Deleting a device and all dependent resources

The DELETE softkey in CDE Form 09, Desktop Device Assignments,
deletes a device and all of its dependent resources including
All line keys (including DLN) that are programmed on a deleted set,
n
standalone BLF, or PKM module
All line and feature keys that are programmed on associated BLF or
n
PKM modules
The associated BLF and PKM modules
n
Any other line appearances and BLF's of the deleted station or set.
n
A warning message appears if any of the above conditions exists. To
continue, press CONFRIM. To abort, press CANCEL.
106