Registering Ip Phones (Optional) - Mitel SX-200 EL Technician's Handbook

Enter the IP Address Lease Time. Enter the number of minutes
n
before a device is disconnected and its IP address is
re-assigned elsewhere. Applies only to the specific bay. To
assign an infinite lease time, use 0 minutes.
Press Enable to enable the DHCP Server.
n
4. Form 09 - Desktop Device Assignments
Assign the IP phones to Bay/Slt/Ccts.
n
(Optional) Enter the MAC Addresses of the IP phones.
n
5. (Optional) Form 02 - Feature Access Codes
Specify the access codes for the IP phones.
n
6. (Optional) Form 03 - COS Define
Enable voice compression by selecting COS number 688.
n
7. Use CDE Forms to program all other station features (for example,
Class of Service, Interconnect Restriction, Set Key Assignments,
and Class of Restriction).

Registering IP Phones (Optional)

Ensure you have the access code--if you programmed one--for set
n
registration in CDE Form 02, Feature Access Codes.
Ensure the directory number and device type is programmed in CDE
n
Form 09, Desktop Device Assignments.
To register IP phones
1. Connect the IP phone to an RJ-45 Ethernet port on the LAN.
2. Press * during power-up (to clear any directory number in memory).
3. Type the acess code followed by the directory number.
4. Press Superkey.
Programming
129