Technician's Handbook
The S1 Switch Settings for the T1 Trunk Cable
Length (not loop length)
0 - 45.8 m (0 - 150 ft.)1 only closed (see figure below)
45.8 - 137.3 m (150 - 450 ft.) 2, 3, 4 closed
137.3 - 200.5 m (450 - 655 ft.) 5, 6, 7 closed
Figure 32: S1 Switch Showing 1 Closed
Control Resource Card Switch Settings
Table 34: Control Resource Card Switch Setting
Normal Operation
Forced Maintenance to
Control
Forced Maintenance to
Peripheral
NOTE:
Open is pressing the switch to the left (away from the PCB); close, to the right
(towards the PCB).
192
S1
S2
Closed
Closed
Open or
Open
Closed
Open
Closed
S3
S4
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used