Adding An Sx-200 Ip Node; Figure 33: Connecting A Bcc Iii Card To An Ethernet Switch - Mitel SX-200 EL Technician's Handbook

Installation

Adding an SX-200 IP Node

1. Install the SX-200 EL Cabinet.
2. Install the SX-200 MCC IIIELx Card.
3. Install the Control Triple CIM Card.
4. Install the BCC III Card.
5. Install an Ethernet Switch.
6. Position the IP Node.
7. Using a standard Ethernet cable with RJ45 Connectors, connect the
BCC III Card's 10 Base T port to the Local Area Network (LAN).

Figure 33: Connecting a BCC III Card to an Ethernet Switch

193