Light/ Digital; Loading New Software Onto A System - Mitel SX-200 EL Technician's Handbook

Technician's Handbook
SX-200 LIGHT/ DIGITAL
To back up the customer database, from the Maintenance screen, do
the following:
1. Select the following commands:
SYSTEM
COPY
DATABASE
The system verifies the data.
The system prompts the user to insert new disks into drives A and B.
2. Insert the new disks into drives A and B.
After inserting new disks, wait for 5 seconds before entering
CONTINUE to allow the system to recognize the new disks.
3. Select CONTINUE.
The system notifies the user upon completion.
4. For the same level of software, select CONTINUE.
5. For a different level of software, select RESET.

Loading New Software Onto a System

SX-200 LIGHT/ DIGITAL
To load new software you must
1. Copy the existing database to new software disks.
2. Reset the system using the main control card switch.
28