Mitel SX-200 EL Technician's Handbook page 100

Technician's Handbook
^B M
Function
Start
Transac-
tion STX
(CTRL B)
4. Verify that the telephone's message waiting lamp is lit.
If the lamp is not lit, check the PMS-related logs in Maintenance. The
n
logs will indicate which section of the PMS message is invalid.
For the PMS to light a lamp station the Dial 0 for that tenant must be
a console, and the Dial 0 must be the same for Night 1 and Night 2.
5. Type the PMS message required to turn off the telephone's
message waiting lamp.
6. Verify that the telephone's message waiting lamp is off.
Turning a telephone's message waiting lamp on and off from a PC
confirms that the PBX's PMS interface works correctly.
If problems continue when you reconnect the customer's PMS
computer, check the maintenance logs for PMS related information,
identifying problems with the customer's PMS hardware/software.
Faster PMS PCs may have to be forced to wait for a reply from the
PBX.
90
W
1
space
space
Status
Code Code
1 = ON
0 = OFF
x x
x x
Station's Extension
(Room) Number
Enter the telephone's extension
number (5 digits with leading
spaces).
x
^C
End
Transac-
tion ETX
(CTRL C)