Mitel SX-200 EL Technician's Handbook page 184

Technician's Handbook
FIM Carrier Assignments for Each Cabinet Type
Control Triple CIM card (FIM II optional) with the SX-200 ELx control
n
cabinet
Control Triple FIM Carrier and FIM with the SX-200 EL control
n
cabinet
Control Dual FIM Carrier and FIM with the SX-200 EL control cabinet
n
or SX-200 ML (RM) control cabinet
Control FIM Carrier and FIM with the SX-200 ML (FD) control
n
cabinet
Peripheral Interface Module Carrier (FIM II or CIM) with the SX-200
n
ELx peripheral cabinet
Peripheral FIM Carrier II with the SX-200 RM peripheral cabinet
n
Peripheral FIM Carrier with the SX-200 LIGHT peripheral cabinet
n
In an SX-200 ELx cabinet, the BCC III can support a FIM II or a
CIM in a peripheral cabinet and the PRI card can support a
FIM II or a CIM in the main control cabinet and in the
peripheral cabinet. Taking advatage of this can replace the
need for a Peripheral FIM Carrier II or the Control Dual FIM
Carrier.
Configuration Rules for the Control Dual FIM Carrier Card
The SX-200 ML (RM) system is limited to only one peripheral cabinet
(Bay 2):
Slot 10 onboard FIM interfaces to first peripheral cabinet (Bay 2)
n
Slot 10 add-on FIM interfaces to second peripheral cabinet
n
(Bay 3)
Slot 11 onboard FIM interfaces to third peripheral cabinet (Bay 4)
n
Slot 11 add-on FIM interfaces to fourth peripheral cabinet (Bay 5)
n
174