Adding An Ex Controller Node To A Mivoice 5000 Cluster Server - Mitel MiVoice 5000 Installing And Configuring
Ex controller and mitel gx gateway
Hide thumbs
Also See for MiVoice 5000:
- User manual (73 pages) ,
- Installation manual (28 pages) ,
- Installation manual (25 pages)
Table of Contents
Advertisement
INSTALLING AND CONFIGURING MITEL EX CONTROLLER AND MITEL GX GATEWAY
5.4
ADDING AN EX CONTROLLER NODE TO A MIVOICE 5000 CLUSTER
SERVER
Declare EX Controller as a cluster node from MiVoice 5000 Manager (refer to document
AMT/PTD/PBX/0143).
On MiVoice 5000 Cluster Server:
•
In Menu Telephone Service>System>EX/GX Configuration>Definition:
•
Enter the name assigned to EX/GX in the Name tab.
•
Enter the IP address of EX Controller in the General settings tab.
Note: Analogue terminals are assigned via the EX/GX menu of the Cluster Server. Digital or
analogue trunks are assigned via the nodes' EX menu.
AMT/PTD/PBX/0173/0/9/EN
12/2019
27
Hide quick links:
Advertisement
Table of Contents
