Registering Ip Telephones From The Station; Register Ip Phones - Mitel 3300 Technician's Handbook

Registering IP Telephones from the Station

This procedure registers the IP devices with the 3300
ICP database. The procedure will program the 3300 ICP
database with the MAC address of the IP device.
Before you begin
• Ensure a Set Registration Access Code is assigned in
the System Options Assignment form.
• Ensure the directory number and device type is
programmed in the Single Line IP Set Configuration
form or Multiline IP Set Configuration form.

Register IP Phones

1. Connect the IP telephone to an RJ-45 Ethernet port
on the LAN.
2. Press * during power-up (to clear any PIN number in
memory).
3. Type the PIN number at the prompt on the IP device.
Prompts are:
• 5001, 5005 IP Phones: solid message light.
• 5005, 5010, 5020, 5205, 5215, 5220 IP Phones,
and 5140, 5240 IP Appliances: display shows Enter
the PIN number.
4. Complete one of the following:
• 5001, 5005, 5201 and 5205 IP Phones: press Hold.
• 5010, 5215, 5020 and 5220 IP Phones: press
SuperKey.
Note: Use the System Administration Tool to program
all other station features (for example, Class of Service,
Interconnect Restriction, Set Key Assignments, and
Class of Restriction).
The PIN number is the set registration code
Note:
followed by the set's extension number.
Programming
133