Camshaft Chain Tensioner Installation - Segway SNARLER ATV 2021 Series Service Manual

ENGINE TOP END ENGINE TOP END
A A
B B
C C
B B
A A
B B
A A
F F
G G
D D
E E
◆ Tighten the camshaft carrier bolts (M6)【D】and
【E】following the tightening sequence as shown.
Torque
9.8 N•m (1.0kgf•m, 87in•lb)
◆ Install
Chain Guard【A】
Bolts M6×20【B】
◆ Tighten:
Torque
Bolts M6×20【B】
9.8 N•m (1.0kgf•m, 87in•lb)

Camshaft Chain Tensioner Installation

Camshaft Chain Tensioner Installation
◆ Push the stopper【A】to release the ratchet and
push the push rod【B】into the tensioner body.
◆ Install
Replace the New Tensioner Gasket【A】
Tensioner【B】
Pipe/line Fixing Plate【C】and Mounting Bolts【D】
Spring【E】,O-Ring【F】and Tensioner Cap Bolt 【G】
◆ Tighten:
Torque
Chain Tensioner Mounting Bolts
9.8 N•m (1.0kgf•m, 87in•lb)
Chain Tensioner Cap Bolt
12 N•m(1.2 kgf•m,8.8 ft•lb)
3-5-36
Bolts M6