Disassembly - Segway SNARLER ATV 2021 Series Service Manual

VEHICLE BODY AND FRAME
A
D
B
C

Disassembly

◆ Remove the middle fl oor; (see the body section for
details)
◆ Remove the outer and middle plastic parts; (see the
body section for details)
◆ Pull out the connectors or cables on the engine, and
disconnect the cables from the main cables;
◆ Use a suitable tool to remove the CVT air inlet pipe
mounting bolt 【B】;
◆ Use a flat screwdriver to remove the hoop【A】,
and remove the CVT air inlet pipe
!
After removing the CVT air inlet pipe, please protect the
CVT air inlet to Avoid debris from falling into the engine,
thereby damaging the engine.
◆ Use a flat screwdriver to remove the hoop 【C】,
and remove the CVT outlet pipe;
!
After removing the CVT air outlet pipe, please protect
the CVT air outlet toAvoid dust from falling into the
engine, thereby damaging the engine.
◆ Use a flat screwdriver to remove the bracket
【D】, disconnect the throttle valve and the
engineConnection of trachea;
!
After removing the throttle valve, please protect the
engine inlet to avoid dust falling into the engine; After
removing the throttle, please protect the throttle to avoid
damage to the throttle.
13 - 16